Edexcel GCSE Computer Science (1CP2) exam questions

Build a practice paper from 604 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Practice paper

5 questions · 13 marks

Pick again

1Multiple choice1 markSound Swap Remove

A sound wave is sampled and the amplitude of each sample is stored using 2 bits.

Identify the number of different amplitude values that can be stored for each sample.

[1 mark]

Mark scheme

B 4 (1)
The only correct answer is B. The correct answer is 4 (2 bits give 2^2 = 4 values).
A is not correct because 2 is the number of bits used to store each sample
C is not correct because 8 different amplitude values would need 3 bits
D is not correct because 16 different amplitude values would need 4 bits

Example answers and how they were marked

Full marks1/1

B 4

Why: Selects the only correct option (1).

No marks0/1

C 8

Why: Near miss: 8 values would need 3 bits, one more than this recording uses (0).

No marks0/1

A 2

Why: Typical misconception: 2 is the number of bits, not the number of amplitude values those bits can store (0).

2Short recall2 marksEmbedded Systems Swap Remove

A digital camera contains an embedded system.

Give two functions that the embedded system performs in the digital camera.

[2 marks]

Mark scheme

Award one mark for any of the following up to a maximum of two marks:

Focus the lens/autofocus (1)
Control the shutter (speed) (1)
Control the flash/decide when the flash is needed (1)
Measure the light level to set the exposure/the aperture (1)
Stabilise the lens/image stabilisation (1)
Zoom the lens in and out (1)
Detect a face/smile (1)

Do not accept 'take a photograph'/'take a picture'/'capture an image', as taking photographs is the function of the camera, which is given in the question.

Do not accept 'press the button' as this is an action of the user, not a function performed by the embedded system.

Do not accept vague answers such as 'use the camera', 'turn the camera on and off' or 'make the camera work', which do not name a function that the embedded system performs.

Example answers and how they were marked

Full marks2/2

It focuses the lens and decides when the flash should fire.

Why: Focus the lens (1) and control the flash (1).

Some marks1/2

It controls the zoom and takes a picture when the button is pressed.

Why: Zoom the lens credited (1); 'takes a picture' is not accepted because taking photographs is the function of the camera, which is given in the question, and 'press the button' is the user's action, not a function of the embedded system.

No marks0/2

It takes a picture when the button is pressed and it makes the camera work.

Why: No mark: 'takes a picture' repeats the camera's function given in the question, 'press the button' is an action of the user, and 'makes the camera work' is too vague to name a function.

3Describe2 marksLow and High Level Languages Swap Remove

A program can be written in a high-level language such as Python.

Describe one characteristic of a high-level programming language.

[2 marks]

Mark scheme

Award up to two marks for a linked description such as:

Statements are written using words/phrases that look like English or maths (1) so the code is easier to read/understand/write (1)
One statement is translated into several machine code instructions (1) so programs are shorter to write than in a low-level language (1)
High-level languages provide built-in data structures such as arrays/lists/records (1) so a collection of data items can be stored and accessed under one name (1)

Do not accept responses that only give a benefit or drawback, such as 'it is easier to learn', with no characteristic.

Do not accept 'it is easier than a low-level language' without saying what the characteristic is.

Example answers and how they were marked

Full marks2/2

Statements are written using words that look like English or maths (1) so the program is easier to read and understand (1).

Why: Characteristic of the statements (1) with a linked development (1).

Some marks1/2

It has built-in data structures such as arrays.

Why: A correct characteristic (1) but no development of what it allows the programmer to do.

No marks0/2

It is easier to learn than a low-level language.

Why: Gives only a benefit compared with a low-level language; no characteristic of the language itself, so no mark.

4Explain2 marksProtocols & Layers Swap Remove

A bank's website can use HTTP or HTTPS.

Explain one benefit to a customer of the bank's website using HTTPS.

[2 marks]

Mark scheme

Award up to two marks for a linked explanation such as:

Data is encrypted/scrambled (1) so it cannot be read/understood if it is intercepted (1)
The customer's bank/personal details are kept secure/private (1) because the data is encrypted/scrambled during transmission (1)
The customer's login details/password cannot be read by an eavesdropper (1) because HTTPS encrypts/scrambles the data sent to and from the web server (1)

For both marks, the expansion must follow/associate with the statement.

Allow 'scrambled' as an alternative to 'encrypted'.

Do not accept 'it is more secure/safe' or 'the data is secure' on its own, without saying how it is made secure (e.g. encryption/scrambling).

Do not accept faster loading/speed, or claims that HTTPS stops viruses or always proves the website is genuine.

Example answers and how they were marked

Full marks2/2

The data is encrypted (1) so anyone intercepting it cannot read the customer's bank details (1).

Why: Linked point (1) and reason (1): encryption means intercepted data cannot be read.

Some marks1/2

The data is encrypted (1) so the website is secure.

Why: Point (1) for encryption, but 'secure' on its own is a near-miss that the mark scheme does not credit as the linked reason; it must say why, e.g. that intercepted data cannot be read.

No marks0/2

HTTPS is faster than HTTP (0) so the customer can log in more quickly.

Why: Speed is not a benefit of HTTPS and is named in a 'Do not accept' line, so no creditworthy point is given.

5Discuss6 marksLow and High Level Languages Swap Remove

A software company is writing a new program that will be sold to users who have different types of computer. The program does not need to control the hardware of the computer directly. The company must decide whether to write the program in a high-level language or a low-level language.

Discuss whether the company should use a high-level language or a low-level language to write this program.

Your answer should consider:

machine independence
processor specificity
how the code is translated for each type of computer.

[6 marks]

Mark scheme

Indicative content

Machine independence

A high-level language is machine independent, so the same source code can be run on different types of computer with few or no changes.
The company can write the program once and sell it to users with different computers, without rewriting the code for each type of computer.
Only one version of the program needs to be written and maintained, so development takes the company less time.

Processor specificity

A low-level language is processor-specific, so a program written for one processor will not run on a different processor without being rewritten.
Assembly language instructions depend on the instruction set of the particular processor, so the company would need a separate version of the program for each type of computer.
Writing a separate low-level version for every type of computer would take the company much longer than writing one high-level program.
Low-level code gives direct control of the hardware of one processor, so it is better suited to device drivers than to a program that must run on many different computers.

Translation

High-level source code is translated for each type of computer by a compiler or an interpreter, so one version of the source code is enough for all the users.
Assembly language is translated into machine code by an assembler, and the assembler produces machine code for one specific processor only.
Machine code is already in a form that one particular processor can execute directly, but the same machine code will not run on a different processor.
Each high-level statement translates into several machine code instructions, so the programmer does not need to know the instruction set of the processor.

Levels

Level 0 (0 marks): No rewardable content.
Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Additional guidance

Level 3 responses must cover both high-level machine independence and low-level processor specificity, with the effect on the company's decision.
Do not award low-level language, assembly language or machine code as portable, or 'high-level languages are written in English/like English' as a reason for machine independence.

Example answers and how they were marked

Full marks6/6

A high-level language is machine independent, so the company can write the program once and it will run on different types of computer with few or no changes. A different compiler is used for each type of processor to translate that same source code into the machine code for that computer, so the company can sell one program to all of its users. A low-level language is processor-specific, so a program written in assembly for one processor will not run on a different one. The assembler produces machine code for one particular instruction set, so the company would need to write a separate version for each type of computer, which would take much longer. As the program does not need to control the hardware directly, the company should use a high-level language.

Why: Develops high-level machine independence with the compiler translating for each processor, and low-level processor specificity with the assembler producing machine code for one instruction set, both applied to the company's decision, in a coherent and sustained argument: Level 3, 6 marks.

Some marks3/6

A high-level language is machine independent, so the company can write the program once. A different compiler is used for each type of computer to translate the code, so users with different computers can all run the same program. A low-level language is processor-specific, so it would not be as suitable for the company.

Why: Machine independence is linked to the compiler and applied to the users, but processor specificity is only asserted and no translation of low-level code is given, so the reasoning is not sustained: Level 2, 3 marks.

Some marks1/6

High-level languages are machine independent because they are written in English, so the company can sell the program to anyone. Low-level languages are machine code, so they can be translated to run on any type of computer.

Why: One basic point that high-level languages are machine independent, applied by selling to anyone (1). 'Written in English' is not a reason for machine independence and low-level code is not portable, so neither is credited: Level 1, 1 mark.

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a paper

Practice paper

Questions by topic

2.1 Binary

2.2 Data representation

2.3 Data storage and compression

3.1 Hardware

3.2 Software

3.3 Programming languages

4.1 Networks

4.2 Network security

5.1 Environmental

5.2 Ethical and legal

More ways to revise Edexcel GCSE Computer Science (1CP2)