Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 604 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

5 questions · 12 marks

Pick again
Print
1Multiple choice1 markImages Swap Remove

Identify the smallest identifiable area of a bitmap image.

[1 mark]
  • AColour depth
  • BFile size
  • CPixel
  • DResolution
Mark scheme
  • C Pixel (1)
  • The only correct answer is C. The correct answer is pixel.
  • A is not correct because colour depth is the number of bits used to store the colour of each pixel
  • B is not correct because file size is the amount of storage an image takes up, not an area of the image
  • D is not correct because resolution is a measure of the number of pixels in an image (such as its width × height), not the smallest identifiable area
Example answers and how they were marked
Full marks1/1

C Pixel

Why: Correct option; a pixel is the smallest identifiable area of a bitmap image (1).

No marks0/1

D Resolution

Why: Resolution is a measure of the number of pixels in an image, not the smallest identifiable area; no mark.

No marks0/1

A Colour depth

Why: Colour depth is the number of bits used to store each pixel's colour, not the smallest identifiable area; no mark.

2Short recall1 markUnits & Conversion Swap Remove

A file has a size of 2 kibibytes.

State the number of bytes in the file.

[1 mark]
Mark scheme

Award one mark for:

  • 2048 (1)
  • 2 × 1024 (1)
  • 2^11 (1)

Allow 2048 bytes.

Do not accept 2000, which is the number of bytes in two decimal kilobytes.

Do not accept 1024, which is the number of bytes in one kibibyte.

Do not accept 16, which is the number of bits in two bytes.

Example answers and how they were marked
Full marks1/1

2048

Why: 2048 is 2 × 1024, the number of bytes in 2 kibibytes (1).

No marks0/1

2000

Why: 2000 uses the decimal kilobyte, not the binary kibibyte; the mark scheme does not accept it.

No marks0/1

16

Why: 16 is the number of bits in two bytes, confusing bits with bytes; the mark scheme does not accept it.

3Describe2 marksUtility Software Swap Remove

A student has a large number of photographs stored on a computer.

Describe the purpose of data compression software.

[2 marks]
Mark scheme

Award up to two marks for a linked description such as:

  • Makes a file/files smaller (1) so less storage space is needed on the disk (1)
  • Reduces the size of the data (1) so it takes less time to upload/download/transfer the file (1)
  • Compresses files/folders into a single file (1) so an attachment is under the size limit for email (1)
  • Reduces the size of the files (1) so more of them fit onto a storage device/backup media (1)

Do not accept 'it compresses the files' on its own, as this repeats the question.

Do not accept responses about protecting files from malware/viruses or about deleting files.

Example answers and how they were marked
Full marks2/2

It makes the files smaller (1) so that they use less storage space on the computer and more of them fit on the disk (1).

Why: The point (1) and a linked development giving the benefit (1).

Some marks1/2

It makes files smaller.

Why: This is the point (1) but there is no development of what the smaller size leads to, so only one mark.

No marks0/2

It protects the files from viruses so that they cannot be damaged.

Why: This describes anti-malware software, which the mark scheme does not accept; no creditworthy point is made.

4Explain2 marksProtocols & Layers Swap Remove

Email protocols are used when an email is sent and received.

Explain the role of SMTP when an email is sent.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Sends outgoing email from the client to the mail server (1) so it can be forwarded/relayed to the recipient's mail server (1)
  • Transfers email between mail servers (1) so it reaches the destination server (1)
  • Pushes/sends the email message (1) because it handles outgoing mail while POP3/IMAP handle incoming mail (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept receiving/downloading email or storing email on the server, which is POP3/IMAP.

Example answers and how they were marked
Full marks2/2

SMTP sends the email from the sender's computer to the mail server (1) so it can be forwarded on to the recipient's mail server (1).

Why: Linked point (1) and reason (1): sends to the mail server so it can be forwarded.

Some marks1/2

SMTP is used to send emails (1).

Why: Role (1) identified, but no linked reason or expansion of what sending involves.

No marks0/2

SMTP downloads the email to the recipient's device (0) so they can read it.

Why: Downloading email is the role of POP3/IMAP, not SMTP, so no credit is given.

5Discuss6 marksTranslators Swap Remove

A student is writing a program in a high-level language. The student runs the program after every small change to check that it works.

Discuss whether the student should use an interpreter or a compiler while writing and testing the program.

Your answer should include:

  • how each translator deals with a syntax error
  • how much of the program is translated at a time
  • how this affects the student's testing.
[6 marks]
Mark scheme

Indicative content

How each translator deals with a syntax error

  • An interpreter stops as soon as it finds a syntax error and displays an error message.
  • With an interpreter, the lines before the error have already been executed, so the student can see how far the program got before it stopped.
  • A compiler reports errors at the end of translation, so the student gets a list of all the syntax errors in the program in one go.

How much of the program is translated at a time

  • An interpreter translates one line at a time and executes each line immediately.
  • A compiler translates the whole program in one go before any of it is run.
  • A compiler produces object code, so after every change the whole program must be compiled again before the student can run it.
  • An interpreter produces no object code, so the student does not have to wait for the whole program to be translated before it runs.

How this affects the student's testing

  • An interpreter suits this student because the program can be run straight away after each small change.
  • The interpreter stops at the first error found, so the student fixes that error and runs the program again, but may only find the next error on the next run.
  • Reporting every error at the end of compilation means the student can fix several errors at once, but cannot run the program until the whole program compiles.
  • The student should use an interpreter while testing, and compile the finished program once it works.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must relate the way each translator works to the student's testing, not just describe the two translators.

Do not accept answers about run-time or logic errors where no comparison of the translators is made.

Example answers and how they were marked
Full marks6/6

The student should use an interpreter while testing. An interpreter translates one line at a time and executes each line straight away, so as soon as the student has made a small change the program can be run without waiting for the whole program to be translated. If there is a syntax error, the interpreter stops at that line and displays an error message, and the lines before it have already been executed, so the student knows exactly where the problem is. A compiler translates the whole program in one go and only reports the errors at the end, so the student would get a list of all the syntax errors, but could not run any of the program until the whole program compiled successfully.

Why: Explains how each translator deals with a syntax error, how much is translated at a time (one line executed immediately against the whole program at once) and links both to the student's testing, with a conclusion. Level 3.

Some marks4/6

An interpreter translates one line at a time and stops when it finds an error, so the student can see where the error is. A compiler translates the whole program and reports all the errors at the end. The interpreter is better for testing because the student can run the program straight away after a change.

Why: Adequate: correct points about error reporting and one line at a time, with a recommendation, but the effect on testing is only asserted rather than reasoned through, so the linkage is not sustained. Level 2.

Some marks1/6

The student should use a compiler because it translates the program one line at a time and stops at the first error, which makes testing quicker.

Why: The roles of the two translators are reversed, so the answer only makes a basic point about testing more quickly. Level 1.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 18
Data Protection Act 14 questions Impact of AI 4 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.