Menu
Exam Questions

Edexcel GCSE Computer Science (1CP2) Exam Questions

Build a practice paper from 604 exam-style questions, each with its mark scheme and example answers. Print it, or answer it on paper and then open the mark schemes. Or browse the questions by topic.

Build a paper

Topics (none ticked: all of them)
Question types (none ticked: all of them)

Practice paper

4 questions · 11 marks

Pick again
Print
1Multiple choice1 markImages Swap Remove

Identify the smallest identifiable area of a bitmap image.

[1 mark]
  • AColour depth
  • BFile size
  • CPixel
  • DResolution
Mark scheme
  • C Pixel (1)
  • The only correct answer is C. The correct answer is pixel.
  • A is not correct because colour depth is the number of bits used to store the colour of each pixel
  • B is not correct because file size is the amount of storage an image takes up, not an area of the image
  • D is not correct because resolution is a measure of the number of pixels in an image (such as its width × height), not the smallest identifiable area
Example answers and how they were marked
Full marks1/1

C Pixel

Why: Correct option; a pixel is the smallest identifiable area of a bitmap image (1).

No marks0/1

D Resolution

Why: Resolution is a measure of the number of pixels in an image, not the smallest identifiable area; no mark.

No marks0/1

A Colour depth

Why: Colour depth is the number of bits used to store each pixel's colour, not the smallest identifiable area; no mark.

2Short recall2 marksCompression Swap Remove

Images and sound can be stored using lossy compression.

Define the term lossy compression.

[2 marks]
Mark scheme

Award one mark for each of the following up to a maximum of two marks:

  • Reduces the size of a file (1)
  • Permanently removes/loses some data (1)
  • The original file cannot be recreated/restored exactly (1)

Allow 'some data is deleted/discarded and cannot be recovered' for the second mark.

Do not award the first mark where the response also states that no data is lost.

Do not accept 'removes repeated data' (this describes lossless compression).

Example answers and how they were marked
Full marks2/2

Lossy compression reduces the size of a file by permanently removing some data, so the original cannot be restored exactly.

Why: Reduces the size of a file (1); permanently removes some data (1); maximum two marks awarded.

Some marks1/2

It makes a file smaller.

Why: Reduces the size of a file (1); no reference to data being permanently lost.

No marks0/2

It makes a file smaller without losing any of the data.

Why: States that no data is lost, which describes lossless compression; the first mark is not awarded.

3Explain2 marksProtocols & Layers Swap Remove

Two computers exchange data over a network.

Explain why network protocols are needed for the two computers to communicate.

[2 marks]
Mark scheme

Award up to two marks for a linked explanation such as:

  • Devices (can) understand/interpret the data they receive (1) because they follow the same set of rules for communication (1)
  • Data is sent in an agreed format/structure (1) so the receiving device can interpret/understand it correctly (1)
  • Devices (can) connect/communicate successfully (1) because they agree how the data is transmitted, such as the type of signal used (1)
  • Errors (can) be detected/handled (1) because both devices follow the same rules for checking the data (1)

For both marks, the expansion must follow/associate with the statement.

Do not accept 'so devices can talk/communicate with each other' or 'so they can understand each other' without saying they follow the same rules/agreed format.

Do not accept an answer that only states protocols are a set of rules, without saying what this allows (e.g. the data can be understood/interpreted).

Do not accept a faster connection/speed as a reason why protocols are needed.

Do not accept naming a protocol (e.g. TCP/IP, HTTP, Wi-Fi) without an explanation of why it is needed.

Do not accept a description of what a protocol does (e.g. 'TCP splits data into packets') without saying why this is needed.

Example answers and how they were marked
Full marks2/2

Devices can understand the data they receive (1) because they follow the same set of rules for communication (1).

Why: Linked point (1) and reason (1): following the same rules is what lets the devices understand the data.

Some marks1/2

Data is sent in an agreed format (1).

Why: Point (1) identified, but no linked reason saying what the agreed format achieves.

No marks0/2

Protocols are needed so the connection is faster (0) because more data can be sent at once.

Why: Speed is not a reason protocols are needed, so there is no creditworthy point or linked reason.

4Discuss6 marksTranslators Swap Remove

A student is writing a program in a high-level language. The student runs the program after every small change to check that it works.

Discuss whether the student should use an interpreter or a compiler while writing and testing the program.

Your answer should include:

  • how each translator deals with a syntax error
  • how much of the program is translated at a time
  • how this affects the student's testing.
[6 marks]
Mark scheme

Indicative content

How each translator deals with a syntax error

  • An interpreter stops as soon as it finds a syntax error and displays an error message.
  • With an interpreter, the lines before the error have already been executed, so the student can see how far the program got before it stopped.
  • A compiler reports errors at the end of translation, so the student gets a list of all the syntax errors in the program in one go.

How much of the program is translated at a time

  • An interpreter translates one line at a time and executes each line immediately.
  • A compiler translates the whole program in one go before any of it is run.
  • A compiler produces object code, so after every change the whole program must be compiled again before the student can run it.
  • An interpreter produces no object code, so the student does not have to wait for the whole program to be translated before it runs.

How this affects the student's testing

  • An interpreter suits this student because the program can be run straight away after each small change.
  • The interpreter stops at the first error found, so the student fixes that error and runs the program again, but may only find the next error on the next run.
  • Reporting every error at the end of compilation means the student can fix several errors at once, but cannot run the program until the whole program compiles.
  • The student should use an interpreter while testing, and compile the finished program once it works.

Levels

  • Level 0 (0 marks): No rewardable content.
  • Level 1 (1–2 marks): Basic, independent points are made, showing elements of understanding of key concepts/principles of computer science. (AO1) The discussion will contain basic information with little linkage between points made or application to the context. (AO2)
  • Level 2 (3–4 marks): Demonstrates adequate understanding of key concepts/principles of computer science. (AO1) The discussion shows some linkages and lines of reasoning with some structure and application to the context. (AO2)
  • Level 3 (5–6 marks): Demonstrates comprehensive understanding of key concepts/principles of computer science to support the discussion being presented. (AO1) The discussion is well developed, with sustained lines of reasoning that are coherent and logically structured, and which clearly apply to the context. (AO2)

Level 3 responses must relate the way each translator works to the student's testing, not just describe the two translators.

Do not accept answers about run-time or logic errors where no comparison of the translators is made.

Example answers and how they were marked
Full marks6/6

The student should use an interpreter while testing. An interpreter translates one line at a time and executes each line straight away, so as soon as the student has made a small change the program can be run without waiting for the whole program to be translated. If there is a syntax error, the interpreter stops at that line and displays an error message, and the lines before it have already been executed, so the student knows exactly where the problem is. A compiler translates the whole program in one go and only reports the errors at the end, so the student would get a list of all the syntax errors, but could not run any of the program until the whole program compiled successfully.

Why: Explains how each translator deals with a syntax error, how much is translated at a time (one line executed immediately against the whole program at once) and links both to the student's testing, with a conclusion. Level 3.

Some marks4/6

An interpreter translates one line at a time and stops when it finds an error, so the student can see where the error is. A compiler translates the whole program and reports all the errors at the end. The interpreter is better for testing because the student can run the program straight away after a change.

Why: Adequate: correct points about error reporting and one line at a time, with a recommendation, but the effect on testing is only asserted rather than reasoned through, so the linkage is not sustained. Level 2.

Some marks1/6

The student should use a compiler because it translates the program one line at a time and stops at the first error, which makes testing quicker.

Why: The roles of the two translators are reversed, so the answer only makes a basic point about testing more quickly. Level 1.

Questions by topic

2.1 Binary

Build a paper on this topic 58
Adding Binary Numbers 6 questions Binary and Hexadecimal Basics 10 questions Binary Shifts 6 questions Binary to Denary Conversion 6 questions Binary to Hexadecimal Conversion 6 questions Denary to Binary Conversion 6 questions Denary to Hexadecimal Conversion 6 questions Denary to Negative Binary Conversion 6 questions Hexadecimal to Binary Conversion 6 questions

2.2 Data representation

Build a paper on this topic 56
Character Sets 18 questions Images 19 questions Sound 19 questions

2.3 Data storage and compression

Build a paper on this topic 24
Compression 18 questions Units & Conversion 6 questions

3.1 Hardware

Build a paper on this topic 77
Embedded Systems 17 questions Fetch Decode Execute Cycle 15 questions Primary Memory 15 questions Secondary Memory 15 questions Stored Program Computers 15 questions

3.2 Software

Build a paper on this topic 124
File Management 18 questions Memory Management 16 questions Peripheral Management 11 questions Process Management 12 questions Purpose & Function of Operating Systems 17 questions Software Basics 13 questions User Management 18 questions Utility Software 19 questions

3.3 Programming languages

Build a paper on this topic 37
Low and High Level Languages 19 questions Translators 18 questions

4.1 Networks

Build a paper on this topic 138
Addressing 16 questions LANs & WANs 16 questions Network Speed 5 questions Packet Switching 16 questions Protocols & Layers 17 questions The Internet 16 questions Topologies 17 questions Wired Connections 17 questions Wireless Connections 18 questions

4.2 Network security

Build a paper on this topic 36
Network Security Risks 18 questions Preventing Network Security Risks 18 questions

5.1 Environmental

Build a paper on this topic 36
E-waste 17 questions Manufacturing Technology 19 questions

5.2 Ethical and legal

Build a paper on this topic 18
Data Protection Act 14 questions Impact of AI 4 questions

More ways to revise Edexcel GCSE Computer Science (1CP2)

Activities Flashcards Revision notes

Teachers: build a paper, print it with the mark schemes at the end, and sign your school up to set your classes activities on every topic.

Fetch Decode Explain isn't affiliated with or endorsed by Pearson Edexcel.